Filter
Top Products
DR-3010C
DR-3010C
39
NOTE
If [CANON DR-3010C] is not displayed in the list of scanners, reinstall the ISIS/
TWAIN driver. (See Chapter 2, "Setup - 2. Installing the Software," on p. 13.)
4
Select the default page size from the Default Page Size drop-down list →
click [OK].
NOTE
• The Configure Device Settings dialog box is displayed only when you select
[CANON DR-3010C] in the [Select Scanner] dialog box for the first time and
click [OK], and when you click [Settings] for the [Select Scanner] dialog box.
• The settings here are applied when you click [Default] in the Properties for
Canon DR-3010C dialog box.
• For a TWAIN driver, the default value is set to 'LTR' and cannot be changed.
5
From the [Scan] menu, select [Scanner Setting].
The Properties for Canon DR-3010C dialog box is displayed.
The Properties for Canon DR-3010C dialog box is displayed when you select
[Scanner Setting] from the [Scan] menu in CapturePerfect 3.0.
It consists of four tabs: Basic, Brightness, Image processing, and Others.
Specify the settings on each tab as necessary to set the scanning conditions.
For details on each setting, also refer to the Help.
[OK] button
Confirms the settings and closes the dialog box.
[Scan] button
For a TWAIN-compatible application that can perform scanning from the
Properties for Canon DR-3010C dialog box, the [Scan] button is displayed
instead of the [OK] button. Press [Scan] to scan with the displayed settings.
[Cancel] button
Cancels the settings and closes the dialog box.
[Default] button
Returns the settings to their default values.
[Help] button
Displays Help for the currently open tab or dialog box.
2. ISIS/TWAIN Driver Properties Dialog Box