Canon DR-5020 Scanner User Manual


 
15
ENGLISH
Part Names
This section describes the names and functions of each part. Before you connect
the DR-5020/5080C, take a few minutes to familiarize yourself with the main
parts.
Front view
Operation panel (P. 17)
This panel is for setting up scan density
and other functions.
The number of scanned pages and error
codes are also displayed here.
Document tray
Load the document in
this tray.
Document tray extension/
extension wire
Open out this extension when
you are loading large-size documents.
Open out the extension wire when you are
scanning documents larger than A4/LTR.
Open/close
button
Press this
button to open
the upper unit.
Paper feed adjustment lever (P.32)
Slide this lever to adjust paper feed
according to the condition of the paper
surface.
Power switch
Turns the scanner
power ON and OFF.
Document guide
Set the paper guide for the
width of the document
you are going to scan.
Document eject tray extension/stopper
This tray prevents large-size scanned documents
from falling onto the floor.
Lift up the stopper to prevent documents from
flying out of the document eject tray extension.
Document eject tray
After a document is scanned, it is ejected
onto this tray.
Imprinter cover
Open out this cover when you are adjusting
the print position of the optional imprinter.
Upper unit
The imprinter cover does not open when the optional imprinter is not installed. Do not
exert unnecessary force to open the imprinter cover.
1.3 Part Names
CAUTION