Canon DR-5020 Scanner User Manual


 
26
Chapter 2 Preparation Before Use
Connecting the Power Cord
Connect the power cord.
Be sure to use only the power cord provided with the scanner.
Connecting the power cord
When connecting the power cord, follow these precautions. Failure to do so might
cause a fire or electrical shock.
Never grasp the plug when your hands are wet.
Never plug the unit into a multi-plug power strip.
Never bundle or tie the power cord around itself or another object. Connect the plug
securely to the power source.
Use only the power cord and plug provided with the scanner.
Before you connect the power cord, be sure to turn the power switch OFF.
Be sure to connect to a AC 220-240V (50/60 Hz)/AC 120V (60 Hz) power supply.
Do not plug the scanner into an outlet shared with another device. If you use an
extension cable, pay attention to the total amperage of the cable.
Connect the power cord to the rear of the scanner, and insert the power plug into
the power outlet.
WARNING