Canon DR-5020 Scanner User Manual


 
60
Chapter 3 Preparing Documents
Function Key Settings
12
34
Function Key 1 Function Key 2
Function Key 3 Function Key 4
Four function keys are located at the top of the operation panel. These keys can
be used easily by one-touch operation on the operation panel by registering the
following items.
The following settings can be registered to the function keys:
Manual Thickness Adjustment
Manually adjusts the paper thickness.
Imprinter ON/OFF
Selects use of the imprinter when the optional imprinter is installed.
Fixed Thickness Mode ON/OFF
Sets the paper thickness to a fixed thickness.
Double Feed Detection ON/OFF
Automatically detects simultaneous feed of two or more documents during
scanning.
Restore Memorized Setting ON/OFF
Registers the scanner settings that are set on the personal computer to the
function keys. Once settings are registered, they can be restored to the scanner
simply by pressing a function key.
Functions are registered to function keys in the application. For details on how to
register settings to function keys, refer to the ISIS/TWAIN Driver Instructions or
Scanning Utility 5000 Instructions.
Default settings are as follows:
Function key 1: Manual Thickness Adjustment
Function key 2: Imprinter ON/OFF (when this option is installed)
Function key 3: Fixed Thickness Mode ON/OFF
Function key 4: Double Feed Detection ON/OFF
Details of functions registered to each function key are saved on the scanner. Note
that these details will revert to their defaults if the scanner is submitted for repair.
MEMO