Filter
Top Products
9-18
Message Cause Action
NO DATA
NO OGM
REC’D IN MEMORY
TAM MEMORY FULL
TX/RX CANCELLED
TX/RX NO.
nnnn
The one-touch speed dialing
button or coded speed dialing
code you entered has not
been registered.
The outgoing message has
not been recorded.
The fax received the
document in memory
because paper or ink ran out,
a paper jam occurred, or the
incorrect BJ cartridge was
installed.
Either 50 messages have
been recorded or the total
maximum recording time of
10 minutes has been reached.
You pressed [Stop] to cancel
the transmission.
When the fax sends or
receives a document, it
assigns it a unique
identification number (
nnnn
).
Register the one-touch speed
dialing button or coded speed
dialing code (see pp. 2-11,
2-13).
Record an outgoing message
(see p. 6-1).
Load paper in the multi-
purpose tray (see p. 1-8),
replace the BJ cartridge (see
p. 9-6) or clear the paper jam
(see p. 9-1).
Listen to your telephone
messages and delete any
unnecessary messages.
Alternatively, erase all
telephone messages stored in
the fax memory (see p. 6-7).
If required, try sending again.
Write the number down if you
will need it later.