Filter
Top Products
SENDING DOCUMENTS
4
4-3
Memory sending ______________________________
The fax normally uses direct sending to send your document. However, you can send it with
memory sending (see below). In this case, the fax quickly scans the document into memory. Then
it sends the document from memory. This means you do not have to wait for the fax to finish
sending before you can retrieve your original document.
You can send up to 15 letter-size pages at a time with memory sending (based on ITU-T No.1
Chart, standard resolution).
n
If MEMORY FULL appears on the LCD during the scanning process, re-start sending the document
using direct sending (see p. 4-2), or divide the document into sections.
1 Load the document face up into the document tray.
See Loading documents, p. 3-2.
You can set the scanning resolution and contrast (see p. 4-1).
2 Press [Function].
▼
Press [Send Options].
3 Use [3] or [4] to select MEMORY TX.
▼
Press [Start/Copy].
4 Dial the receiving party’s fax number.
Use one of the dialing methods described in this chapter (see p. 4-2).
TEL= 3456xxxx
5 Press [Start/Copy].
The fax scans the document into memory and begins sending.