Filter
Top Products
4-10
■ Setting the options for automatic redialing
You can set the following options for automatic redialing:
• Whether or not the fax redials automatically.
• The number of times the fax attempts to redial.
• The time interval between redialing attempts.
1 Press [Function].
▼
Press [Start/Copy].
USER SETTINGS
2 Use [3] or [4] to select TX SETTINGS.
▼
Press [Start/Copy].
ECM TX
3 Use [3] or [4] to select AUTO REDIAL.
▼
Press [Start/Copy].
• To disable automatic redialing, use [3] or [4] to select OFF, then press [Start/Copy]. Press [Stop]
to return to standby mode.
• To enable automatic redialing, use [3] or [4] to select ON and continue with the steps below.
ON
4 Press [Start/Copy] twice.
2TIMES
5 Use the numeric buttons to enter the number of times you want the fax to redial.
You can select from 1 to 10 times (see p. 7-3).
▼
Press [Start/Copy] twice.
2MIN.
6 Use the numeric buttons to enter the time interval between redialing attempts.
You can select from 2 to 99 minutes (see p. 7-3).
▼
Press [Start/Copy].
7 Press [Stop].
The fax returns to standby mode.