Filter
Top Products
3-2
1 Adjust the document guide to the width of the document, and gently insert the top of the
document face up into the document tray until you hear a beep.
n
• For a multipage document, the pages are fed one by one from the top of the stack.
• Wait until all pages of your document have been scanned before starting a new job.
• Make sure you follow the procedure above to load documents into the document tray. If the
document is not loaded into the document tray correctly, it may not be fed into the fax
properly; resulting in a jam, or in pages not being sent.
• If you want to send a document with more than 15 letter-size (5 legal-size) pages*, divide the
document into sections and send each section in a separate transmission.
* The total thickness of the paper stack must be less than 0.08 in. (2mm).
Loading documents
Problems with multipage documents _________
If you have trouble feeding multipage documents from the document tray into the fax, remove the
stack and tap it on a flat surface to even the edges. Then slant the stack so that its front edge is
beveled, and insert the stack into the document tray.
n
To avoid feeding problems, make sure the document meets the document requirements (see p. 3-1).