Filter
Top Products
SOLUTIONS TO COMMON PROBLEMS
9
9-7
• Discard the old BJ cartridge immediately according to the local laws and regulations for disposal
of consumables. You may want to place it in a plastic bag to keep any residual ink from spilling.
• Spilled ink can stain any surface; protect yourself and your work area.
4 Remove the new BJ cartridge from its package, then remove the orange protective cap q
and tape w.
1
2
• Discard the cap and tape. Never attempt to reattach them to the BJ cartridge print head.
• Install the BJ cartridge immediately after removing the cap and tape.
• Spilled ink can stain any surface; protect yourself and your work area.
5 Align the slot in the cartridge with the yellow post in the fax, and with the label facing
outwards, insert the BJ cartridge into the cartridge holder q. Lower the cartridge lock
lever w until you hear a click to lock the cartridge in place.
1
2
The yellow post (BJ cartridge guide) should be visible through the slot. The BJ cartridge tilts slightly
to the left before lowering the cartridge lock lever.
6 Close the printer cover.
If the AUTO TEST PRINT setting is set to ON:
The fax automatically prints a test page.
The fax prints a test page every time you insert a BJ cartridge.
• Load the paper in the multi-purpose tray before you replace the BJ cartridge.
• You can turn off automatic test printing by changing the AUTO TEST PRINT setting. See
SYSTEM SETTINGS, p. 7-5.