Filter
Top Products
8-2
Message (Error Code) Cause Action
ECM TX The machine is sending a fax using Error
Correction Mode (ECM).
ECM transmissions may take longer than
normal transmissions. Turn off ECM if
you need to transmit quickly, or if you
know your local lines are in good
condition. (→ ECM TX, p. 9-5)
MEMORY USED nn % Shows the percentage of memory
currently in use.
If you need more space, wait for the
machine to send any faxes. Also, print or
delete any documents in memory you no
longer need. (→ pp. 4-14, 4-15)
NO RX PAPER ( 012)
The other party’s fax machine is out of
paper or its memory is full.
Contact the other party and have them
load paper in their fax machine or free up
space in their fax machine’s memory.
NO TEL # ( 022)
The one-touch speed dialling button or
coded speed dialling code you entered has
not been registered.
Register the one-touch speed dialling
button or coded speed dialling code.
(→ pp. 3-2, 3-4)
NOT AVAILABLE In manual sending via the handset, you
entered a speed dialling number that is
assigned to a group.
Use regular dialling, or enter a one-touch
speed dialling button or coded speed
dialling code that only has one fax/
telephone number registered.
REC’D IN MEMORY The machine received the fax in memory
because paper or ink ran out, or a paper
jam occurred.
Load paper in the multi-purpose tray
(→ Quick Start Guide), replace the Ink
Tank(s) (→ Reference Guide), or clear
the paper jam. (→ Reference Guide)
RECEIVED IN FILE Your PC was off and a document was
received in the machine’s memory.
Upload the document to your PC, or print
the document. (→ pp. 4-14, 5-5)
The MultiPASS Status Monitor is not
running. (Windows 95/98/Me)
On the Windows
®
desktop, click Start
and point to Programs. On the Programs
menu, point to MultiPASS Suite, then
click MultiPASS Status Monitor.
TRY AGAIN IN B&W
( 085)
You tried sending a colour document to a
machine that does not support colour
faxing.
Try sending again in black & white
(→ p. 4-1). Alternatively, enable the
COLOUR DIRECT TX setting.
(→ p. 9-6)
TX/RX CANCELLED You pressed Stop/Reset to cancel the
transmission.
If required, try sending or receiving
again.
TX/RX NO. nnnn When the machine sends or receives a fax,
it assigns it a unique identification number
(nnnn).
Write the number down if you will need it
later.
TX nnnn
SCANNING P. nnn
MEMORY FULL
PLEASE WAIT
The machine is sending a document and its
memory is full.
The machine continues to send the
document as memory becomes available.