Filter
Top Products
PCI/ISA System Board
46
Step 5
Remove the G486VPB from its original packing box.
Be careful to avoid touching all connectors and pins on
the board. Please refer to the handling instructions on
pages 10 and 11 for proper handling techniques.
Step 6
Insert the HSIM modules into the SIMM banks on the
G486VPB. The quantity and location of the SIM
modules is dependent upon the memory configuration
and type of modules you intend to use.
Step 7
Install the CPU. Be sure Pin 1 of the CPU is aligned
with Pin 1 of the socket.
Step 8
Set the appropriate jumpers.
Step 9
Install the prepared G486VPB system board into the
case and replace the screws.
Step 10
Reinstall all cards and connectors and replace the sys-
tem unit cover. Reconnect all power cords and cables.