Filter
Top Products
G486VPB
51
Floppy Disk Drive Controller
The G486VPB system board has a built-in floppy disk
controller that supports two standard floppy disk drives.
You can install any 360KB/720KB/1.2MB/1.44MB
floppy disk drives (2.88MB optional).
Connecting the Floppy Disk Cable
The Floppy Disk Connector on the
G486VPB System Board
Step 1
Install the 34-pin header connector into the floppy disk
connector (J4) on the system board. The colored edge of
the ribbon should be aligned to pin 1 of the J4 connec-
tor.