PCI/ISA System Board
68
you will be prompted to enter the correct password
again. Otherwise, enter a new password.
To delete or disable the password function, simply press
<Enter> instead of typing in a new password. Press the
<Esc> key to return to the main menu.
If you forget your password, you should clear any
previously set password by setting Jumper JP2 pins 2
and 3 to On for approximately two minutes. Please refer
to page 41 for more information.
User Password
Set a user's password with “System” option selected if
you want another user to have access only to your
system but not to setup. Using user's password to enter
Setup allows a user to access only “User Password”
option that appears on the main screen. Access to all
other options is denied.
If you want to set a user's password when “Setup”
option is selected under the BIOS Features Setup, a user
will be prompted to enter a password only when trying
to access setup. If the correct password is entered, a user
will be able to access only “User Password” option that
appears on the main screen.
To set, confirm, verify, disable or delete a user's pass-
word, follow the procedure described in the section
above, “Supervisor Password”. If you forget your pass-
word, refer to the procedure described in the same
section.