Filter
Top Products
Maintenance
CHRISTIE DIGITAL SYSTEMS P35GPS Projector
March, 2004
5-3
5.4.2. OUTER T IMING BELT
Refer to Figure 5-2 below.
1. Loosen outer belt tension adjust assembly screw (item 6 in Figure 5-2) and slide idler
(item 3 in Figure 5-2) up to release tension on outer timing belt (item 5 in Figure 5-2).
2. Remove outer timing belt.
1: Jack-shaft Pulley (194820-001)
2: Motor Pulley
(60Hz-194825-001,50Hz194825-
002)
3: Idler (194756-001)
4: Flanged Idler (194756-002)
5: Outer Timing Belt (598931-528)
6: SHC Screw (515500-045)
7: Inner and Outer Idler Assembly
(194750-001)
8: Intermittent Pulley (194818-001)
9: Screw (515500-105)
Figure 5-2: Outer Timing Belt
5.4.3. INNER T IMING B ELT
Refer to Figure 5-3 below.
1. Remove outer timing belt (see Section 5.4.2).
2. Loosen adjustable inner idler pulley screw (item 1 in Figure 5-3).
3. Remove inner timing belt (item 10 in Figure 5-3).