Filter
Top Products
P35GPS Dual Lens Turret Projector
CHRISTIE DIGITAL SYSTEMS P35GPS Projector 5-4
March, 2004
1: Inner Belt Tensioner
(196056-001)
2: Shutter Driver Standoff
(119153P001)
3: Upper Sprocket Pulley
(194858-001)
4: Center Sprocket Pulley
(194858-001)
5: Inner Belt Pulley
(194750-001)
6: Not Used
7: Shutter Driver Assembly
(194866-001)
8: Screw (598931-042)
9: Single Blade Shutter
Assembly
(194697-001)
10: Inner Timing Belt
(598931-179)
11: Lower Sprocket Pulley
(194858-002)
12: Changeover Dowser
(121195-001)
Figure 5-3: Inner Timing Belt
5.4.4. S
HUTTER T IMING BELT
Refer to Figure 5-4 below.
1. Loosen three Allen head screws securing jack-shaft assembly to mainframe (item 5 in
Figure 5-4).
2. Pull jack-shaft assembly down approximately 0.5 inch.
3. Remove shutter timing belt (item 1 in Figure 5-4).