Filter
Top Products
116
X-C 6250 Pro (300) NT Users Manual
79-0030-001 11 January 2001
-WARNING: CMOS checksum invalid - run SCU
-WARNING: CMOS failure - run SCU
Run the System Configuration Utility (SCU) to set the system
configuration. If the problem persists, contact your organizations help
desk. (See Section 5, Customizing Settings, for more information
about the SCU.)
-WARNING: Keyboard controller failure
-WARNING: Keyboard failure
Reboot the computer by pressing CTRL+ALT+DEL. If the problem
persists, the keyboard is not usable; contact your organizations help
desk.
-WARNING: No bootable floppy drive 0 installed
-WARNING: No interrupts from timer 0
Restart the computer by pressing both mouse buttons for at least 10
seconds and then releasing the buttons. If the problem persists, contact
your organizations help desk.
WARNING: Time/date corrupt - run SCU
Run the System Configuration Utility (SCU) to set the time of day and
date. (See Section 5, Customizing Settings, for more information
about the SCU.)
WARNING: Unexpected amount of memory - run SCU
Run the System Configuration Utility (SCU) to reinitialize the system
configuration. If the problem persists, contact your organizations help
desk. (See Section 5, Customizing Settings, for more information
about the SCU.)
xxxxxh Option ROM checksum failure where xxxxxh is the starting
address of the option ROM
An expansion board contains a defective ROM. Try restarting the
computer by pressing CTRL+ALT+DEL. If the problem persists, the
expansion board may need to be replaced. Report this error to your
supervisor or your organizations help desk.