Filter
Top Products
45
Section 4. If You Have a Radio Modem
79-0030-001 11 January 2001
GSM
To use your GSM International Radio Software you will need to install
the GSM modem, the GSM software and a 3V Subscriber Identity
Module (SIM) Card.
To install the Wavecom GSM modem, do the following:
1 Go to Start, Settings, Control Panel and click on Modems.
2 Click Add.
3 Check the box Dont detect my modem, I will select it from a list,
then click Next.
4 Select the Manufacturers Wavecom name, and the Models
Wismo2C, then click Next.
5 Select to install your modem as Selected ports on COM4 and click
Next.
6 Select Finish, then Close.
7 You may have a window titled Modem Setup that pops up and
says:
Dial Up Networking needs to be configured because the list of
installed modems has changed. Would you like to do this now?
Select Yes.
8 You will have a window pop up that is titled Remote Access Setup.
Select Add. A window will pop up titled Add RAS Device with
COM4 - Wismo2C. Select OK.
9 Select Yes when it asks you to restart your computer.
CAUTION Your modem generates radio frequency (RF) signals. Do
not operate the radio modem before you have registered it with a
network provider. The network will not accept a signal from an
unregistered device. Unauthorized use of your radio modem may
interfere with local business or government communications,
resulting in fines or other legal action.