Filter
Top Products
80
79-0030-001 11 January 2001
X-C 6250 Pro (300) NT Users Manual
Connecting a Printer
You can connect a printer to the mobile computer with the parallel or
serial cable supplied with your printer. This allows you to print
documents that are stored in the computer. See your printers users
manual for more information.
To connect a printer to the parallel port
1 Open the I/O dust cover on the back of the computer and connect
the male end of the parallel cable to the 25-pin connector (the larger
of the two connectors).
This connector is referred to as LPT1.
2 Connect the other end of the cable to your printer.
3 Follow the instructions for your application to use the printer.
To connect a printer to the serial port
1 Open the I/O dust cover on the back of the computer and connect
the male end of the parallel cable to the 9-pin connector (the smaller
of the two connectors).
This connector is referred to as COM1.
2 Connect the other end of the cable to your printer.
3 Follow the instructions for your application to use the printer.
BACK VIEW
9-pin
Serial Port
Dust Cover
(open)
25-pin
Parallel Port