Filter
Top Products
127
Appendix B. Troubleshooting
79-0030-001 11 January 2001
Display
The underlined, inverse, and hypertext characters are difficult to
read on the screen
•
Adjust the contrast by pressing FN+F4 and FN+F5 (these keys are
not active on a 10.4-inch color display).
• Change the color scheme. From the Start Menu select Settings,
Control Panel, choose Display, and then click the Appearance tab to
make changes to the color scheme.
The display goes squiggley wiggley after removing/inserting the
battery
• This can occur if you attempt to turn on the unit with a low or
depleted battery. Restart the unit by pressing and holding down both
mouse buttons for at least 10 seconds and then releasing the
buttons. Connect external power and recharge the battery.
I cant see the cursor while using the Command Prompt
• Press FN+INSERT to change from insert mode to overwrite mode to
enable a block cursor. When it defaults to insert mode, the
Command Prompt uses an underline cursor which is less visible than
the block cursor for overwrite mode.
The display appears to have random pixels darkened after
scrolling
• Contact your supervisor or your organizations help desk for
information about correcting this problem.
CAUTION Restarting your computer while you are running appli-
cations or while you are working in Windows may corrupt files or
data.