Filter
Top Products
68
X-C 6250 Pro (300) NT Users Manual
79-0030-001 11 January 2001
Hard Disk Standby
To conserve power, the hard disk switches to standby mode after a
period of inactivity and resumes when it detects activity.
Display
To conserve power, the system turns off the display when the computer
enters suspend mode. It automatically turns on when the computer is
turned back on.
Backlight
The display backlight can be turned on to make information on the
screen easier to read in low-light situations. To conserve power on the
monochrome display only, the system automatically turns off the
backlight after a period of inactivity. You must manually turn the
backlight on by pressing FN+F1 when you resume. You can change the
time-out setting for the backlight in the System Configuration Utility
(SCU). See Section 5, Customizing Settings, for more information.
On a color display, the backlight is always on whenever the computer is
running. See About the Display Backlight below.
About the Display Backlight
10.4-inch color
• Backlight is always on when the computer is runnning
• FN+F1 toggles MaxBright on/off
• FN+F2 dims
• FN+F3 brightens
• FN+F2 and FN+F3 are active only when MaxBright is
off
10-inch monochrome
• FN+F1 toggles the backlight on/off
• FN+F2 dims
• FN+F3 brightens