CHAPTER
11-1
Cisco ONS 15310-CL and Cisco ONS 15310-MA Ethernet Card Software Feature and Configuration Guide R8.5
78-18133-01
11
Configuring Quality of Service on the ML-Series
Card
This chapter describes the Quality of Service (QoS) features built into your ML-Series card. It also
describes how to map QoS scheduling at both the system and interface levels.
This chapter contains the following major sections:
• Understanding QoS, page 11-2
• ML-Series QoS, page 11-4
• QoS on RPR, page 11-9
• Configuring QoS, page 11-10
• Monitoring and Verifying QoS Configuration, page 11-16
• QoS Configuration Examples, page 11-17
• Understanding Multicast QoS and Multicast Priority Queuing, page 11-23
• Configuring Multicast Priority Queuing QoS, page 11-24
• QoS not Configured on Egress, page 11-26
• ML-Series Egress Bandwidth Example, page 11-26
• Understanding CoS-Based Packet Statistics, page 11-28
• Configuring CoS-Based Packet Statistics, page 11-29
• Understanding IP SLA, page 11-30
The ML-Series card employs the Cisco IOS Modular QoS Command-line Interface (MQC). For more
information on general MQC configuration, refer to the following Cisco IOS documents:
• Cisco IOS Quality of Service Solutions Configuration Guide, Release 12.2 at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122mindx/l22index.htm
• Cisco IOS Quality of Service Solutions Command Reference, Release 12.2 at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos_r/index.htm