Filter
Top Products
14-25
Cisco ONS 15310-CL and Cisco ONS 15310-MA Ethernet Card Software Feature and Configuration Guide R8.5
78-18133-01
Chapter 14 Configuring Resilient Packet Ring on the ML-Series Card
Cisco Proprietary RPR KeepAlive
Step 26 Complete the following Cisco IOS configuration for the ML-Series card in Adjacent Node 1, beginning
in global configuration mode:
Step 27 Start a Cisco IOS CLI session for the ML-Series card in Adjacent Node 2.
Step 28 Complete the following Cisco IOS configuration on the Adjacent Node 2 ML-Series card, beginning in
global configuration mode:
Step 29 Use a test set to verify that Ethernet connectivity exists on the RPR.
Step 30 Monitor Ethernet traffic and routing tables for at least one hour after the node deletion.
Stop. You have completed this procedure.
Cisco Proprietary RPR KeepAlive
Please see Cisco ONS 15454 Ether Guide Chapter 17
Configuring Cisco Proprietary RPR KeepAlive
Please see Cisco ONS 15454 Ether Guide Chapter 17
Monitoring Cisco Propretary RPR KeepAlive
Please see Cisco ONS 15454 Ether Guide Chapter 17
Cisco Proprietary RPR Shortest Path
Please see Cisco ONS 15454 Ether Guide Chapter 17
Configuring Shortest Path and Topology Discovery
Please seeCisco ONS 15454 Ether Guide Chapter 17
a.
Router(config)# interface pos
interface-number
Enters interface configuration mode for the POS port at one
endpoint of the first newly created circuit.
b.
Router(config-if)# no
shutdown
Enables the port.
a.
Router(config)# interface pos
interface-number
Enters interface configuration mode for the POS port at one
endpoint of the second newly created circuit.
b.
Router(config-if)# no
shutdown
Enables the port.