Filter
Top Products
4-8
Cisco ONS 15310-CL and Cisco ONS 15310-MA Ethernet Card Software Feature and Configuration Guide R8.5
78-18133-01
Chapter 4 Configuring Interfaces on the ML-Series Card
Monitoring Operations on the Fast Ethernet Interfaces
pkts_good_runts 0
pkts_error_runts 5
pkts_ucast 26976
pkts_mcast 57281
pkts_bcast 0
align_errors 1
FCS_errors 5
Overruns 0
MAC Transmit Counters
Bytes 1657084026
pkts64 23344
pkts65to127 48188
pkts128to255 12358
pkts256to511 38550
pkts512to1023 24897
pkts1024to1518 11305
pkts1519to1530 62760
pkts_ucast 17250
pkts_mcast 23108
pkts_bcast 11
pkts_fcs_err 0
pkts_giants 0
pkts_underruns 0
pkts_one_collision 0
pkts_multiple_collisions 0
pkts_excessive_collision 0
Ucode drops 2053079661
Enter the show run interface [type number] command to display information about the configuration of
the Fast Ethernet interface. The command is useful when there are multiple interfaces and you want to
look at the configuration of a specific interface.
Example 4-4 shows output from the show run interface [type number] command, which includes
information about the IP or lack of IP address and the state of the interface.
Example 4-4 show run interface Command Output
daytona# show run interface fastethernet 1
Building configuration...
Current configuration : 222 bytes
!
interface FastEthernet1
no ip address
duplex full
speed 10
mode dot1q-tunnel
l2protocol-tunnel cdp
l2protocol-tunnel stp
l2protocol-tunnel vtp
no cdp enable
bridge-group 2
bridge-group 2 spanning-disabled
end