Filter
Top Products
11-21
Cisco ONS 15310-CL and Cisco ONS 15310-MA Ethernet Card Software Feature and Configuration Guide R8.5
78-18133-01
Chapter 11 Configuring Quality of Service on the ML-Series Card
QoS Configuration Examples
Figure 11-8 ML-Series Policing Example
Example 11-10 ML-Series Policing Commands
Router(config)# class-map match-all policer
Router(config-cmap)# match ip precedence 0
Router(config-cmap)# exit
Router(config)# policy-map police_f0
Router(config-pmap)# class policer
Router(config-pmap-c)# police 1000000 10000 conform-action transmit exceed-action drop
Router(config-pmap-c)# interface FastEthernet0
Router(config-if)# service-policy input police_f0
ML-Series CoS-Based QoS Example
Figure 11-9 shows an example of ML-Series CoS-based QoS. The associated code is provided in the
examples that follow the figure. The CoS example assumes that the ML-Series cards are configured into
an RPR and that the ML-Series card POS ports are linked by point-to-point SONET circuits. ML-Series
Card A and ML-Series Card C are customer access points. ML-Series Card B is not a customer access
point. For more information on configuring RPR, see Chapter 14, “Configuring Resilient Packet Ring
on the ML-Series Card.”
ML-Series
Fast Ethernet 0 POS 0
Router_a
Policer on Fast Ethernet 0 allows 1,000,000 bps of traffic with an IP ToS value of 0.
Excess traffic with an IP ToS value of 0 is dropped.
SONET/SDH
124088