Filter
Top Products
102
You can also view POST error codes with the show diagnostic post command. This command displays
the results of each POST that executed at power-on.
Example
To view FRU errors on your Topspin 270/Cisco SFS 7008, enter the show diagnostic fru-error
command.
Example
The following types of hardware errors are logged for the Topspin 270/Cisco SFS 7008 power supply:
SFS-270# show diagnostic post
================================================================================
Post Status
================================================================================
fru-slot post-status error-codes
--------------------------------------------------------------------------------
card(1) failed 1:0:0:0
fan(1) passed 0:0:0:0
fan(2) passed 0:0:0:0
power-supply(1) passed 0:0:0:0
SFS-270# show diagnostic fru-error
================================================================================
Fru-Error
================================================================================
fru-slot fru-error
--------------------------------------------------------------------------------
card(1) _FRU_POWER_CONTROLLER_CONFIG_ERR
fan(1) none
fan(2) none
power-supply(1) none
Table 6-1: Topspin 270/Cisco SFS 7008 Power Supply Errors
Error Number Description
1 Power Supply DC Fail Error
2 Power Supply Fan Fail Error
3 Power Supply I2C Communication Error