Filter
Top Products
95
• Standard page 95
• Extended
• Extended Memory
Run a Chassis Standard Test
The chassis standard diag test runs a diagnostic test on all cards in the chassis.
1. Enter the diag chassis test standard and start commands to initiate the test.
Example
2. Enter the show diag chassis command to show the status of the diag test.
Example
SFS-270> enable
SFS-270# config
SFS-270(config)# diag chassis test standard
SFS-270(config-diag-chassis)# start
SFS-270(config-diag-chassis)#
SFS-270(config-diag-chassis)# exit
SFS-270(config)# exit
SFS-270# show diag chassis
================================================================================
Diagnostic Tests For Chassis
================================================================================
module-type : chassis
module-number : 1
test : standard
iterations : 1
option : none
action : start
result : success
percentage-completed : 100
result-string : Standard System Test Completed, Final report : Passed=1,
Failed=0, Total=1
SFS-270#