Cisco Systems 3.3 Server User Manual


 
Chapter 8 System Configuration: Basic
Cisco Secure ACS Active Service Management
8-20
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Step 6 If you are done setting up Cisco Secure ACS Service Management, click Submit.
Cisco Secure ACS implements the service management settings you made.
Event Logging
The Event Logging feature enables you to configure whether Cisco Secure ACS
logs events to the Windows event log and whether Cisco Secure ACS generates an
e-mail when an event occurs. Cisco Secure ACS uses the System Monitoring
feature to detect the events to be logged. For more information about system
monitoring, see System Monitoring Options, page 8-18.
Setting Up Event Logging
To view the Windows event log, select Start > Programs > Administrative
Tools > Event Viewer. For more information about the Windows event log or
Event Viewer, refer to your Microsoft Windows documentation.
To set up Cisco Secure ACS event logging, follow these steps:
Step 1 In the navigation bar, click System Configuration.
Step 2 Click ACS Service Management.
The ACS Active Service Management Setup page appears.
Step 3 To have Cisco Secure ACS send all events to the Windows event log, select Log
all events to the Windows Event log.
Step 4 To have Cisco Secure ACS send an e-mail when an event occurs, follow these
steps:
a. Select the Email notification of event check box.
b. In the To box, type the e-mail address (up to 200 characters) to which
Cisco Secure ACS should send event notification e-mail.
Note Do not use underscores in the e-mail addresses you type in this box.