Filter
Top Products
9-19
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Chapter 9 System Configuration: Advanced
CiscoSecure Database Replication
Note For each primary Cisco Secure ACS for this secondary Cisco Secure
ACS, on both the primary and secondary Cisco Secure ACS, the AAA
Servers table entries for the primary Cisco Secure ACS must have
identical shared secrets.
Step 8 Click Submit.
Cisco Secure ACS saves the replication configuration, and at the frequency or
times you specified, Cisco Secure ACS begins accepting the replicated
components from the other Cisco Secure ACSes you specified.
Replicating Immediately
You can manually start database replication.
Note Replication cannot occur until you have configured at least one secondary
Cisco Secure ACS. For more information about configuring a secondary
Cisco Secure ACS, see Configuring a Secondary Cisco Secure ACS, page 9-17.
Before You Begin
Ensure correct configuration of the primary and secondary Cisco Secure ACSes.
For detailed steps, see Implementing Primary and Secondary Replication Setups
on Cisco Secure ACSes, page 9-15.
For each secondary Cisco Secure ACS that this Cisco Secure ACS is to send
replicated components to, make sure that you have completed the steps in
Configuring a Secondary Cisco Secure ACS, page 9-17.
To initiate database replication immediately, follow these steps:
Step 1 Log in to the HTML interface on the primary Cisco Secure ACS.
Step 2 In the navigation bar, click System Configuration.
Step 3 Click CiscoSecure Database Replication.