Filter
Top Products
Chapter 1 Introducing IP/TV Servers
Cisco IP/TV Broadcast Servers
1-16
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Ethernet Port
The Cisco IP/TV 3426 Broadcast Server comes with one integrated dual-port
Ethernet controller. This controller provides an interface for connecting to
10-Mbps, 100-Mbps, or 1000-Mbps networks and provides full-duplex (FDX)
capability, which enables simultaneous transmission and reception of data on the
Ethernet local-area network (LAN).
To access the Ethernet port, connect a Category 3, 4, or 5 unshielded twisted-pair
(UTP) cable to the RJ-45 connector on the back of the device.
Note The 100BASE-TX/1000BASE-TX Ethernet standard requires that the cabling in
the network be Category 5 or higher.
Table 1-9 Cisco IP/TV 3426 Broadcast Server Back Panel Ports and
Connectors
Item Description
AC power receptacle The AC power cord connects to this plug.
Ethernet 1 port This 10/100/1000BASE-T port is autosensing with
full-duplex capability; it connects IP/TV Server to
the Ethernet LAN.
Ethernet 2 port This 10/100/1000BASE-T port is autosensing with
full-duplex capability; it connects IP/TV Server to
the Ethernet LAN.
Serial port This is a standard serial port.
Onboard video port A monitor connects to this standard DB-15 video
port.
Mouse and keyboard
ports
A mouse and keyboard can be connected to these
standard mouse and keyboard ports, which are
color-coded.
Audio/video port (on
video capture card)
• 4 BNC
1
connectors for composite video input
• 8-pin mini-DIN connector for audio input
1. BNC = Bayonet Neill-Concelman