Filter
Top Products
Chapter 3 Installing the IP/TV Server
Installing Cisco IP/TV 3426 Broadcast Server Units
3-18
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Figure 3-15 IP/TV 3426 Broadcast Server Back Panel Ports and Receptacles
Connecting Power and Booting the System
To connect power to your system, follow these steps:
Step 1 Review the information in the “Safety Warnings” section on page 2-2.
Step 2 Plug the power cord into the power cord receptacle on the back of the IP/TV
Server. (See Figure 3-15.)
Step 3 Connect the other end of the power cord to a power source at your installation site.
Step 4 Power up all externally connected devices.
1 AC power receptacle 2 Winnov Videum 4400 video capture card
3 Serial port 4 Ethernet 2 receptacle
5 Ethernet 1 receptacle 6 Onboard video port
7 Mouse port 8 Keyboard port
9 PCI 2; SCSI adapter and port
96401
1 2
4 378 569