Filter
Top Products
3-3
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Chapter 3 Installing the IP/TV Server
Installing Cisco IP/TV 3425 and 3425A Server Units
Installing Cisco IP/TV 3425 and 3425A Server Units
Place the unit in the desired location. You can mount it in a rack for your
convenience, or place it on a solid, stable surface. If you do not plan to install the
IP/TV Server in an equipment rack, proceed to the “Installing the IP/TV Server
on a Tabletop” section on page 3-30.
This sections discusses the following topics:
• Tools and Parts Required
• Attaching the Mounting Brackets
• Installing the Chassis in a Rack
• Connecting Cables
• Connecting Power and Booting the System
Tools and Parts Required
A rack-mount and cable-management kit is included in your shipping container
accessory box. The rack-mount brackets in the kit are suitable for mounting
Cisco IP/TV 3425 and 3425A Server units in 19-inch (48.26-cm) or 23-inch
(58.42-cm) 4-post or 2-post equipment racks.
You need the following parts and tools to install an IP/TV Server in a rack:
• Phillips screwdriver
• One rack-mount kit, which includes:
–
Two rack-mount brackets
–
Four 12-24 x 0.50-inch (12.7-mm) flat-head Phillips rack screws
–
Four 18-8 x 0.37-inch (9.4-mm) flat-head Phillips bracket screws for
19-inch (48.3-cm) racks
–
Four 8 x 0.375-inch (9.5-mm) round-head Phillips bracket screws for
23-inch (58.4-cm) racks
–
One cable holder and screw (installation optional)
–
Four self-adhesive feet (for optional tabletop installation)
• One power cable