Filter
Top Products
3 Using Cisco Transport Controller 78-11719-02 July 2001
Cisco ONS 15327 User Documentation3-32
Note For users to gain access to multiple nodes, the same user name and password must exist on
each node.
Security levels also limit the amount of time you can leave the system idle before the CTC window
is locked to prevent unauthorized users from making changes. Higher security levels have shorter
idle times. Table 3-12 shows CTC security levels and their idle times.
Procedure: Create New Users
Step 1 From the CTC node view or network view, click the Provisioning tab.
Step 2 Click the Security subtab.
Step 3 On the Security pane, click Create.
Users created at the network view are given access (added) to all nodes on the network.
Step 4 In the Create User dialog box enter the following:
• Name— type the user name.
• Password—type the user password. The password must contain at least six characters
and can be any letter or number (a-z, A-Z, 0-9).
• Confirm Password—type the password again to confirm it.
• Security Level—Select the user’s security level.
Step 5 Click OK.
Figure 3-18 Assigning a security level in the Create User dialog box
Table 3-12 ONS 15327 Security Idle Times
Security Level Idle Time
Retrieve Unlimited
Maintenance 60 minutes
Provisioning 30 minutes
Superuser 15 minutes