Filter
Top Products
78-11719-02 July 2001 Using Cisco Transport Controller 3
Cisco ONS 15327 User Documentation 3-35
• Reversion time—if Revertive is checked, enter the amount of time following a
corrected failure condition that the ONS 15327 should switch back to the working
port.
Step 7 Click OK.
Note The default XTCPROTGRP provides XTC-level protection for DS-1 and DS-3 ports. It is
non-revertive and cannot be modified or deleted.
Procedure: Edit Protection Groups
Step 1 Display the CTC node view.
Step 2 Click the Provisioning > Protection tabs (Figure 3-20).
Figure 3-20 Editing and deleting protection groups in the Protection subtab
Step 3
Under Protection Groups, choose a protection group.
Step 4 Under Selected Group, edit the fields as appropriate. (For field descriptions, see the
“Create Protection Groups for Optical Cards” section on page 3-34.)
Step 5 Click Apply.