Filter
Top Products
78-11719-02 July 2001 Using Cisco Transport Controller 3
Cisco ONS 15327 User Documentation 3-9
Step 5 Click Specify an IP address.
Step 6 In the IP Address field, enter an IP address that is on the same subnet but not identical to
the ONS 15327 (in the example the new IP address is 192.1.0.5). The last three digits
must be between 1 and 254.
Step 7 Type 255.255.255.0 in the Subnet Mask field.
Step 8 Click OK.
Step 9 (Windows 95/98) Click the Gateway tab (Figure 3-3).
Figure 3-3 The TCP/IP Properties dialog box – Gateway tab (Windows 95/98)
Step 10
This step defines the ONS 15327 as the default gateway for the PC. In the New Gateway
field (Windows 95/98) or Default Gateway field (Windows NT), type the ONS 15327 IP
address. For initial setup, this is the default address that ships with the ONS 15327
(192.1.0.2).
Step 11 Click Apply (Windows NT) or Add (Windows 95/98). For Windows 95/98, verify that
the IP address displays in the Installed Gateways field.
Step 12 You will be prompted to restart your PC. Click Yes.
Step 13 Test the connection:
(a) Start Netscape or Windows Explorer.
(b) Enter the ONS 15327 IP address in the Web address (URL) field. Within 30 seconds,
the CTC login screen displays. If it does not appear, continue with Steps c and d.
(c) From the Windows Start menu, choose MS-DOS prompt.
(d) At the DOS prompt, type ping [ONS 15327 IP address], for example, ping
192.1.0.2
. If your computer is connected to the ONS 15327, a “reply from [IP
address]”
message displays.