Filter
Top Products
Document Organization
PA-4T+ Synchronous Serial Port Adapter Installation and Configurationvi
Document Organization
This document is organized into the following chapters:
Related Documentation
Your router and the Cisco IOS software running on it contain extensive features and functionality,
which are documented in the following resources:
• For Cisco IOS software configuration information and support, refer to the modular
configuration and modular command reference publications in the Cisco IOS software
configuration documentation set that corresponds to the software release installed on your
Cisco hardware.
Note You can access Cisco IOS software configuration and hardware installation and
maintenance documentation on the World Wide Web at http://www.cisco.com,
http://www-china.cisco.com, or http://www-europe.cisco.com.
• For hardware installation and maintenance information on the Cisco 7000 series and Cisco 7500
series routers, and the VIP2, refer to the following publications:
— The installation and configuration guide that shipped with your Cisco 7000 series or
Cisco 7500 series router
— Second-Generation Versatile Interface Processor (VIP2) Installation and Configuration (for
VIP2 users only)
Section Title Description
Chapter 1 Overview Describes the PA-4T+ port adapter, illustrates their
location in the supported hardware platforms, and
describes its LED displays, cables, and receptacles.
Chapter 2 Preparing for Installation Describes safety considerations, tools required, and
procedures you should perform before the actual
installation.
Chapter 3 VIP2 and the
PA-4T+ Port Adapter
Provides instructions for installing the PA-4T+ port
adapter on a VIP2 interface processor installed in a
Cisco 7500 or Cisco 7000 series router.
Chapter 4 Cisco 7200 Series and the
PA-4T+ Port Adapter
Provides instructions for installing the PA-4T+ port
adapter in a Cisco 7200 series router.
Chapter 5 Cisco uBR7200 Series and the
PA-4T+ Port Adapter
Provides instructions for installing the PA-4T+ port
adapter in a Cisco uBR7200 series universal
broadband router.
Chapter 6 Cisco 7100 Series and the
PA-4T+ Port Adapter
Provides instructions for installing the PA-4T+ port
adapter in Cisco 7100 series routers.
Chapter 7 Installing the PA-4T+ Interface
Cables
Provides instructions for installing port adapter
cables on the supported platforms.
Chapter 8 Configuring the PA-4T+
Interfaces
Provides instructions for configuring your port
adapter on the supported platforms. The instructions
given in thischapter apply to allsupported platforms
described in this document.