Filter
Top Products
CHAPTER
Cisco uBR7200 Series and the PA-4T+ Port Adapter 5-1
5
Cisco uBR7200 Series and the
PA-4T+ Port Adapter
This chapter provides information on the PA-4T+ port adapter and its use on Cisco uBR7200 series
universal broadband routers. This chapter includes the following sections:
• Installation Overview, page 5-1
• Removing a Port Adapter, page 5-2
• Installing a Port Adapter, page 5-4
Installation Overview
The PA-4T+ can be installed in any of the available port adapter slots in the Cisco uBR7200 series.
Figure 5-1 shows a PA-4T+ installed in port adapter slot 2 of the Cisco uBR7246.
Figure 5-1 PA-4T+ in Port Adapter Slot 2—Cisco uBR7246
Depending on the circumstances,you might need to install anew port adapteror replace a failed port
adapter inthe Cisco uBR7200 series.In eithercase, no toolsare necessary;all port adaptersavailable
for the Cisco uBR7200 series connect directly to the router midplane and are locked into position by
a port adapter lever (Cisco uBR7223) or retention clip (Cisco uBR7246). When removing and
replacing a port adapter, you will need an antistatic mat onto which you can place a removed port
adapter and an antistatic container into which you can place a failed port adapter for shipment back
to the factory.
14615
PA-4T+ port adapter