Filter
Top Products
Installing a Port Adapter
PA-4T+ Synchronous Serial Port Adapter Installation and Configuration3-6
Figure 3-6 Port Adapter Installed in a Port Adapter Slot—Partial Port Adapter View
Step 4
Replace the screw in the rear of the port adapter slot. (See Figure 3-3 for its location.)
Do not overtighten this screw.
Step 5 Reinstall the VIP2 in the system. (Follow the steps in the section “Installing a VIP2” in
the configuration note Second-Generation Versatile Interface Processor (VIP2)
Installation and Configuration, which shipped with your VIP2.)
Step 6 If disconnected, reconnect the interface cables to the port adapters.
This completes the procedure for installing a port adapter on a VIP2. Proceed to Chapter 7,
“Installing the PA-4T+ Interface Cables,” to connect the necessary cables to your port adapter.
H3152