Filter
Top Products
10
Step 1 Assemble the two crossrail supports. Use three screws for each crossrail assembly.
Make sure that they are oriented so that both crossrails will support the SCE 2000 when they are attached to the rack.
Attach the Crossrail Supports to the Rack
Figure 5: Attaching the Crossrails to the Rack
Step 1 Align the crossrail supports with the side of the rack, parallel to the floor.
Step 2 Insert and tighten two screws to the front posts or mounting strips of the rack
Step 3 Insert and tighten two screws to the Back posts of the rack.
Step 4 Repeat steps 2 through 4 on the other side of the rack, keeping the brackets flush against the posts and parallel to
the supporting bracket on first side of the rack.