Filter
Top Products
50
Viewing the User Log Counters
View the user log for errors that occurred during the installation process.
To display the user log device counters, complete the following steps:
Step 1 At the SCE 2000# prompt, type show logger device User-File-Log counters and press Enter.
EXAMPLE:
The following example shows the current User-File-Log device counters.
SCE 2000#show logger device user-file-log counters
Logger device User-File-Log counters:
Total info messages: 1
Total warning messages: 0
Total error messages: 0
Total fatal messages: 0
If there are “Total error messages” or “Total fatal messages”, use the show logger device User-File-Log
command to display details about the errors.
Viewing Configuration
When you enter configuration commands, it immediately effects the SCE 2000 operation and configuration. This
configuration, referred to as the running-config, is saved in the SCE 2000 volatile memory and is effective while
the SCE 2000 is up. After reboot, the SCE 2000 loads the startup-config, which includes the non-default
configuration as saved by the user, into the running-config.
The SCE 2000 provides commands for:
• Viewing the running configuration
• Viewing the startup configuration
After configuring the SCE 2000, you may query for the running configuration using the command show running-
config. This command displays the non-default running configuration. To view all SCE 2000 running configuration,
whether it is the default or not, you may use the option all-data in the show running-config command.