Filter
Top Products
17
Connect the AC-Input Power Supply Unit
Figure 11: Connecting the AC Power
Step 1 Plug the AC-input power cable into the AC-input power receptacle on the AC-input power supply
Note
For AC-input power, we recommend powering the SCE 2000 platform from a 120 VAC, 15A receptacle U.S. (240 VAC,
10A international) at the power source.
15 A branch circuit protection is recommended.
Step 2 Plug the AC power supply cable into the AC power source.
Step 3 Turn the on/off switch to the on (⏐) position.
Step 4 Look at the IN and OK LEDs on the power supply unit and the corresponding Power LED on the front panel. If
the AC-input power supply unit is operating properly, these LEDs will be glowing green.
Step 5 Ensure that the power supply is properly aligned and the installation screw is tightened.