Filter
Top Products
5
Model Information
Table 2-1 SCE Platform Model Information
Model number SCE 2020 4/8xFE
Link Type Fast Ethernet
Number of Ports 4
Number of Links 2
Site Preparation and Unpacking
• Lift the SCE 2000 platform safely out of the packing container.
• Ensure the power service at the site is suitable for the SCE 2000 platform.
• Check the packing slip to ensure that all the proper components are present.
• Locate and have accessible the Site Log for recording information about this installation.
Tools and Parts
Use the following list of tools and parts as a checklist for preparing for installing the SCE 2000 platform:
• Appropriate cables to connect the SCE 2000 to the network and console terminal
• Tape measure (optional)
• Level (optional)
• Number 1 Phillips screwdriver
• Number 2 Phillips screwdriver
• 1/4-inch flat-blade screwdriver
• 1/4-inch hex wrench
• Grounding kit (shipped with SCE 2000)
• 12 AWG or 2.5 mm copper installation wire with hex or loop connectors for DC power leads (DC power only)
Ring terminals must be UL approved and suitable for 12 AWG wire.
• AC power cords (AC power only, shipped with SCE 2000)
• Rack-mounting kit (shipped with SCE 2000)
• Spare screws for changing bracket position