Filter
Top Products
34
Enable the SCE enterprise traps []:
Step 16 Type the name of the system administrator and press Enter.
Note that there is no default for this parameter.
Enter system administrator contact name []:
EXAMPLE:
Following is a sample SNMP configuration, configuring one trap manager, one GET community, and one SET
community, and enabling the authentication failure trap, as well as all enterprise traps.
Would you like to enter the SNMP configuration menu? [no]: y
Enable SNMP management? [no]: y
Enter SNMP GET community name[]: public
Enter Access list number allowing access with this community string, use ‘0’ to allow
all: 0
Would you like to add another SNMP GET community? [no]:
Enter SNMP SET community name[]: private
Enter Access list number allowing access with this community string, use ‘0’ to allow
all: 2
Would you like to add another SNMP SET community? [no]:
Would you like to configure SNMP trap managers? [no]: y
Enter SNMP trap manager IP address: 10.1.1.253
Enter SNMP trap manager community string: public
Enter trap manager SNMP version: 2c
Would you like to add another SNMP trap manager? [no]:
Enable the ‘Authentication Failure’ trap [no]: y
Enable SCE enterprise traps []: y
Enter system administrator contact name []: John Smith
Step 9: Configuring the Topology-Dependent Parameters
The topology configuration menu is a series of guided questions relating to the deployment of the SCE 2000 in the
network and its mode of operation. Values for the parameters are configured based on the user answers.
The correct value for each parameter must be ascertained before configuring the system to make sure that the system will
function in the desired manner. (See Topology for a comprehensive discussion of topology and the related parameters.)
Note
Values may not be requested for all topology-dependent parameters, as certain parameters do not apply to all topologies.
There are six topology-related parameters:
• Connection mode: Can be either of the following, depending on the physical installation of the SCE 2000.
• Inline
• Receive-only
• Type of deployment: Can be one of the following, depending on the actual deployment:
• Single-SCE Platform: a single SCE 2000 is deployed on one or two SCAS BB Console links
• Cascade: two cascaded SCE 2000s are deployed on two SCAS BB Console links, working as a fully redundant
solution.