Filter
Top Products
Administration
Time S ettings
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 65
5
To set the idle session timeout for various types of sessions:
STEP 1 Click Administration > Idle Session Timeout.
STEP 2 Select the timeout for the each session from the corresponding list. The default
timeout value is 10 minutes.
STEP 3 Click Apply to set the configuration settings on the device.
Time Settings
See Administration: Time Settings.
System Log
See Administration: System Log.
File Management
See Administration: File Management.
Rebooting the Device
Some configuration changes, such as enabling jumbo frame support, require the
system to be rebooted before they take effect. However, rebooting the device
deletes the Running Configuration, so it is critical that the Running Configuration is
saved to the Startup Configuration before the device is rebooted. Clicking Apply
does not save the configuration to the Startup Configuration. For more information
on files and file types, see the System Files section.
You can back up the configuration by using
Administration > File Management >
Copy/Save Configuration
or clicking Save at the top of the window. You can also
upload the configuration from a remote device. See the Download/Backup
Configuration/Log section.