Filter
Top Products
VLAN Management
VLAN Groups
208 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
13
Workflow
To define a MAC-based VLAN group:
1. Assign a MAC address to a VLAN group ID (using the MAC-Based Groups
page).
2. For each required interface:
a. Assign the VLAN group to a VLAN (using Mac-Based Groups to VLAN page).
The interfaces must be in General mode.
b. If the interface does not belong to the VLAN, manually assign it to the VLAN
using the Port to VLAN page.
Assigning MAC-based VLAN Groups
See Table 1 for a description of the availability of this feature.
To assign a MAC address to a VLAN Group:
STEP 1 Click VLAN Management > VLAN Groups > MAC-Based Groups.
STEP 2 Click Add.
STEP 3 Enter the values for the following fields:
• MAC Address—Enter a MAC address to be assigned to a VLAN group.
NOTE This MAC address cannot be assigned to any other VLAN group.
• Mask—Enter one of the following:
- Host—Source host of the MAC address
Sx500,
Sx500ESW2-
550X
Layer 2 Yes
Layer 3 No
SG500X Native Ye s
Basic Hybrid - Layer 2 Ye s
Basic Hybrid - Layer 3 No
SG500XG Same as Sx500 Ye s
SKU System Mode MAC-based VLAN Groups
Supported