Filter
Top Products
Administration
System Settings
60 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
5
System Settings
The System Summary page provides a graphic view of the device, and displays
device status, hardware information, firmware version information, general PoE
status, and other items.
Displaying the System Summary
To view system information, click Status and Statistics > System Summary.
The System Summary page contains system and hardware information.
System Information:
• Base MAC Address—Device MAC address. If the system is in stack mode,
the base MAC address of the master unit is displayed.
NOTE If the system is in Native Stacking mode, the Firmware Version
number shown is based on the version of the master.
• Firmware Version (Non-active Image)—Firmware version number of the
non-active image. If the system is in Native Stacking mode, the version of
the master unit is displayed.
• System Stack Mode—Displays whether the device is part of a stack
(Native Stacking or Standalone). The following options are available:
• System Operational Mode—Specifies whether the system is operating in
Layer 2 or Layer 3 system mode for 500 devices. .
• System Description—A description of the system.
• System Location—Physical location of the device. Click Edit to go the
System Settings page to enter this value.
• System Contact—Name of a contact person. Click Edit to go the System
Settings page to enter this value.
• Host Name—Name of the device. Click Edit to go the System Settings
page to enter this value. By default, the device hostname is composed of
the word switch concatenated with the three least significant bytes of the
device MAC address (the six furthest right hexadecimal digits).
• System Object ID—Unique vendor identification of the network
management subsystem contained in the entity (used in SNMP).