Filter
Top Products
Administration
Routing Resources
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 69
5
• Tota l—Displays the number of TCAM entries which are currently being
used.
• Maximum Entries—Select one of the following options:
- Use Default—On Sx500 the number of TCAM entries is 25% of the
TCAM size. On SG500X/SG500XG the number of Router TCAM entries
is 50% of the Router TCAM size.
- User Defined—Enter a value.
The following fields are displayed for IPv6 routing:
• Neighbors—Count is the number of neighbors recorded on the device and
TCAM Entries is the number of TCAM entries being used for the neighbors.
• Interfaces—Count is the number of IP addresses on interfaces on the
device and TCAM Entries is the number of TCAM entries being used for the
IP addresses.
• On Link Prefixes—Count is the number of prefixes defined on the device
and TCAM Entries is the number of TCAM entries being used for the
prefixes.
• Routes—Count is the number of routes recorded on the device and TCAM
Entries is the number of TCAM entries being used for the routes.
• Tota l—Displays the number of TCAM entries which are currently being
used.
• Maximum Entries—Select one of the following options:
- Use Default—On Sx500 the number of TCAM entries is 25% of the
TCAM size. On SG500X/SG500XG the number of Router TCAM entries
is 50% of the Router TCAM size.
- User Defined—Enter a value.
STEP 2 Save the new settings by clicking Apply. This checks the feasibility of the router
resources settings. If it is incorrect, an error message is displayed. If it is correct,
the settings are copied to the Running Configuration file.
NOTE A summary of the TCAM entries actually in use and available is
displayed at the bottom of this page. For an explanation of the fields, see
Viewing TCAM Utilization.