Filter
Top Products
Client Quality of Service
Class Map
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point 120
7
• Match Every Packet—The match condition is true to all the parameters in a
Layer 3 packet.
When selected, all Layer 3 packets will match the condition.
• Protocol—Use a Layer 3 or Layer 4 protocol match condition based on the
value of the IP Protocol field in IPv4 packets or the Next Header field in IPv6
packets.
If you select this field, choose the protocol to match by keyword or enter a
protocol ID.
- Select From List—Match the selected protocol: IP, ICMP, IPv6, ICMPv6,
I G M P, TC P, U D P.
- Match to Value—Match a protocol that is not listed by name. Enter the
protocol ID. The protocol ID is a standard value assigned by IANA. The
range is a number from 0 to 255.
• Source IP Address or Source IPv6 Address—Requires a packet's source
IP address to match the address listed here. Check the box and enter an IP
address.
• Source IP Mask (IPv4 only)—The source IP address mask.
The mask for DiffServ is a network-style bit mask in IP dotted decimal format
indicating which part(s) of the destination IP address to use for matching
against packet content.
A DiffServ mask of 255.255.255.255 indicates that all bits are important, and
a mask of 0.0.0.0 indicates that no bits are important. The opposite is true
with an ACL wildcard mask. For example, to match the criteria to a single host
address, use a mask of 255.255.255.255. To match the criteria to a 24-bit
subnet (for example, 192.168.10.0/24), use a mask of 255.255.255.0.
• Source IPv6 Prefix Length (IPv6 only)—The prefix length of the source IPv6
address.
• Destination IP Address or Destination IPv6 Address—Requires a packet's
destination IP address to match the address listed here. Enter an IP address
in the appropriate field to apply this criteria.
• Destination IP Mask (IPv4 only)—The destination IP address mask.
The mask for DiffServ is a network-style bit mask in IP dotted decimal format
indicating which part(s) of the destination IP address to use for matching
against packet content.