Filter
Top Products
Wireless
WorkGroup Bridge
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point 91
5
- WPA Enterprise
• VLAN ID—The VLAN associated with the BSS.
NOTE The Infrastructure Client Interface will be associated with the
upstream WAP device with the configured credentials. The WAP device may
obtain its IP address from a DHCP server on the upstream link. Alternatively,
you can assign a static IP address. The Connection Status field indicates
whether the WAP is connected to the upstream WAP device. You can click
the Refresh button at the top of the page to view the latest connection
status.
STEP 5 Configure the following additional fields for the Access Point Interface:
• Status—Select Enable for the Access Point Interface.
• SSID—The SSID for the Access Point Interface does not need to be the
same as the Infrastructure Client SSID. However, if attempting to support a
roaming type of scenario, the SSID and security must be the same.
• SSID Broadcast—Select if you want the downstream SSID to be broadcast.
SSID Broadcast is enabled by default.
• Security—The type of security to use for authenticating. Choices are:
- None
- Static WEP
- WPA Personal
• MAC Filtering—Select one of these options:
- Disabled—The set of clients in the APs BSS that can access the
upstream network is not restricted to the clients specified in a MAC
address list.
- Local—The set of clients in the APs BSS that can access the upstream
network is restricted to the clients specified in a locally defined MAC
address list.
- RADIUS—The set of clients in the APs BSS that can access the upstream
network is restricted to the clients specified in a MAC address list on a
RADIUS server.
If you select Local or RADIUS, see MAC Filtering for instructions on creating
the MAC filter list.