Filter
Top Products
Administration
Reboot
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point 43
3
• Backup Configuration—Backup configuration file type saved on the WAP
device.
• Mirror Configuration—If the Startup Configuration is not modified for at
least 24 hours, it is automatically saved to a Mirror Configuration file. The
Mirror Configuration file is a snapshot of a past Startup Configuration. The
Mirror Configuration is preserved across factory resets, so it can be used to
recover a system configuration after a factory reset by copying the Mirror
Configuration to the Startup Configuration.
STEP 3 For the Destination File Name, select the file type to be replaced with the file you
are copying.
STEP 4 Click Save to begin the copy process.
When complete, a window shows the message, Copy Operation Successful.
Reboot
You can use the Reboot page reboot the WAP device.
STEP 1 To reboot the WAP, select Administration > Reboot in the navigation pane.
STEP 2 Select one of these options:
• Reboot—Reboots the WAP using Startup Configuration.
• Reboot to Factory Default—Reboots the WAP using the factory default
configuration file. Any customized settings are lost.
A window appears to enable you to confirm or cancel the reboot. The current
management session might be terminated.
STEP 3 Click OK to reboot.