Filter
Top Products
Getting Started with the WRVS4400N Router
Placement Options
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 23
4
STEP 3 Repeat step 2 with the other stand.
Wall Option
To mount the Cisco WRVS4400N router on the wall, follow these steps.
STEP 1 Determine where you want to mount the router and install two screws (not
supplied) that are 2-9/16 in. apart (approximately 64.5 mm).
STEP 2 With the back panel pointing up (if installing vertically), line up the router so that the
wall-mount crisscross slots on the bottom of the access point line up with the two
screws.
STEP 3 Place the wall-mount slots over the screws and slide the router down until the
screws fit snugly into the wall-mount slots.
193817
Wall
mount
slots
2-9/16